
Advisory Committee
Keita Ando
Keio University, Department of Mechanical Engineering, Japan
Tommaso Astarita
Università degli Studi di Napoli Federico II, Italia
Luis Azevedo
Pontifícia Universidade Católica do Rio de Janeiro, Mechanical Engineering, Brasil
William Bachalo
Artium Technologies Inc., USA
Philippe Bardet
George Washington University, USA
Steven Beresh
Sandia National Laboratories , USA
Edouard Berrocal
Lund University, Faculty of Engineering, Sweden
Jacques Borée
CNRS, ENSMA, France
Isaac Boxx
Deutsches Zentrum für Luft- und Raumfahrt (DLR), Institut für Verbrennungstechnik, Germany
Christoph Brücker
City University of London, Aeronautical Engineering, UK
Marc Brunel
University of Rouen, CORIA laboratory, UMR CNRS, France
Kenneth T. Christensen
Illinois Institute of Technology, USA
Christian Cierpka
Institute of Thermodynamics and Fluid Mechanics, Technical University of Ilmenau, Germany
Noel Clemens
The University of Texas at Austin, Aerospace Engineering and Engineering mechanics, USA
Jürgen Czarske
Dresden University of Technology, Faculty of Electrical Engineering and Information Technology, Germany
Nils Damaschke
University of Rostock, Institut für Allgemeine Elektrotechnik, Germany
Laurent David
Faculté de Sciences Fondamentales et Appliquées, Université de Poitiers, France
James Dawson
Dept. of Energy and Process Engineering, Norwegian University of Science & Technology, Norway
Fabrizio de Gregorio
Centro Italiano di Ricerece Aerospaziali, Italy
Stefano Discetti
Universidad Carlos III de Madrid, Spain
Lyazid Djenidi
Mechanical Engineering Department, The University of Newcastle, Australia
Gerrit E. Elsinga
Laboratory for Aero and Hydrodynamics, Delft University of Technology, The Netherlands
Sina Ghaemi
University of Alberta, Department of Mechanical Engineering, Canada
Bharathram Ganapathisubramani
Aerodynamics and Flight Mechanics Research Group, University of Southampton, UK
Qi Gao
School of Aeronautics and Astronautics, Zhejiang University, China
Sven Grundmann
LSM, University of Rostock, Germany
Yannis Hardalupas
Department of Mechanical Engineering, Imperial College London, UK
Shigeo Hosokawa
Kansai University, Japan
Yuji Ikeda
Imagineering, Inc., Japan
Mark Jermy
University of Canterbury, Mechanical Engineering, New Zeland
Nobuyuki Kawahara
Department of Mechanical Engineering, Okayama University, Japan
Kenneth Kiger
University of Maryland, A. James Clark School of Engineering, Department of Mechanical Engineering, USA
Michael Klaas
RWTH Aachen University, Institute of Aerodynamics, Germany
Jochen Kriegseis
Institute of Fluid Mechanics, Karlsruhe Institute of Technology, Germany
Bertrand Lecordier
Université et INSA de Rouen, France
Huan Lian
Institute of Mechanics, Chinese Academy of Sciences, China
Rui Lima
University of Minho, School of Engineering, Mechanical Engineering Department, Portugal
Rob Littlewood
DANTEC Dynamics, Denmark
Fabrice Lemoine
Institut National Polytechnique de Lorraine, Laboratoire d'Énergétique et de Mécanique Théorique et Appliquée, France
Todd Lowe
Virginia Tech, College Engineering, Aerospace & Ocean Engineering, USA
Antonio Lozano
LITEC, University of Zaragoza, Spain
Dimitriy Markovich
Institution of the Russian Academy of Sciences, the Kutateladze Institute of Thermophysics, Siberian Branch of the RAS
Ivan Marusic
Department of Mechanical and Manufacturing Engineering, The University of Melbourne, Australia
Monica Moroni
Sapienza University of Rome, Department of Civil, Constructional and Environmental Engineeering, Italy
Karen Mulleners
Institute of Mechanical Engineering, École Polytechnique Fédérale de Lausanne, Switzerland
Godfrey Mungal
School of Engineering, Santa Clara University, USA
Daniel T.H. New
Nanyang Technological University, School of Mechanical & Aerospace Engineering, Singapore
Holger Nobach
Max-Planck-Institut für Dynamic und Selbstorganisation, Germany
David Nobes
University of Alberta, Faculty of Engineering, Canada
Fabrice Onofri
École Polytechnique Universitaire de Marseille, France
Virginia Palero
Instituto de Investigación en Ingeniería de Aragón, Universidade de Zaragoza, Spain
Christian Poelma
Process and Energy Department, Delft University of Technology, The Netherlands
Giorgio Querzoli
Dipartimento di Ingegneria del Territorio – Università di Cagliari, Italy
Markus Raffel
German Aerospace Center, Institute of Aerodynamics and Flow Technology, Göttingen, Germany
David E. Rival
TU Braunschweig, Germany
Massimilano Rossi
University of Bologna, Italy
Jun Sakakibara
Department of Mechanical Engineering, Meiji University, Japan
Fulvio Scarano
Department of Aerospace Engineering, Delft University of Technology, The Netherlands
Andrea Sciacchitano
Department of Aerospace Engineering, Delft University of Technology, The Netherlands
Andreas Schröder
German Aerospace Center, Institute of Aerodynamics and Flow Technology, Göttingen, Germany
André Silva
AeroG, Department of Aerospace Sciences, University of Beira Interior, Portugal
Julio Soria
Monash University, Department of Mechanical and Aerospace Engineering, Australia
Yoshiyuki Tagawa
Dept. of Mechanical Systems Engineering, Tokyo University of Agriculture and Technology, Japan
Mamoru Tanahashi
Tokyo Institute of Technology, Department of Mechanical and Aerospace Engineering, Japan
Alex Taylor
Imperial College London, Department Mechanical Engineering, United Kingdom
Brian Thurow
Department of Aerospace Engineering at Auburn University, USA
Bas van Oudheusden
Delft University of Technology, Department of Aerospace Engineering, Netherlands
Pavlos Vlachos
Purdue University, College of Engineering, USA
Jerry Westerweel
Laboratory for Aero and Hydrodynamics, Delft University of Technology, The Netherlands
Bernhard Wieneke
LaVision GmbH, Germany
Christian Willert
German Aerospace Center, Institute of Propulsion Technology, Germany
Minami Yoda
G. W. Woodruff School of Mech. Eng., Georgia Institute of Technology, USA
Katharina Zähringer
University of Magdeburg, Institute of Fluid Dynamics & Thermodynamics, Germany